Potency
Perfected
About Steampunk Chemicals
At Steampunk we were founded to go against the traditional B2B grain in our industry. This is crystal clear in our SP machines that are built to last with incredible fuel efficiency, low on-going maintenance costs & the best cleaning in class. With our chemicals the rule is simple “We do not ship water or air”. This may not seem like a big deal statement to most, but keep in mind that the majority of profit in the cleaning chemical industry is from shipping you “ready spray” products (water) and adding fillers to powder while changing label to require more Oz’s per gallon (Air). So Steampunks promise to our VIP business clients is to not ship you water or air! This is summed up internally as our “potency perfected Protocol”. We want you to be more profitable to grow with more effective products to boot. We do not ship short drums, we clearly tell you how many lbs of product or gallons of liquid you are getting. We encourage you to compare the amount of use you get from our products per $1 spent against all other suppliers. You can download the table we made on this page to input your current products for each category (this is recommended for larger fleets) This is how we look at the use per product in our own fleets.
Learn More About Our Chemicals
Each Product comes in 3 sizes: 1 Gallon, 5 Gallon, Drum
Extreme Clean Powder
(Citrus Soft Surface Powder)
Is a concentrated all purpose cleaning powder with fresh citrus scent. Extremely Clean powder was carefully formulated with 99% environmentally friendly chemistry while also keeping a highly concentrated product in mind. Add our multi use residue free extremely clean powder to your pre spray or your SP Truck mount rinse. Recommended for both commercial & residential carpets. Can be mixed with any of our other chemicals to make the perfect pre spray to meet your high expectations!
Directions:
Mix with tap to warm water and preferably softened water. Extremely Clean Powder can be used alone or add a booster to cut through tough grease and grime with ease. Make sure to fully flush carpet after. Use mechanical agitation in traffic lanes and high usage areas for deeper and quicker results. Can also be used as an alkaline rinse
Mixing Guide:
8-1 INLINE SPRAYER (8-160z)
4-1 INLINE SPRAYER
(4-80z)
PUMP UP SPRAYER
(1-2z) per gallon
TRUCK MOUNT USE
(80z) per 5 gallon
Is a concentrated all purpose cleaning powder with fresh citrus scent. Extremely Clean powder was carefully formulated with 99% environmentally friendly chemistry while also keeping a highly concentrated product in mind. Add our multi use residue free extremely clean powder to your pre spray or your SP Truck mount rinse. Recommended for both commercial & residential carpets. Can be mixed with any of our other chemicals to make the perfect pre spray to meet your high expectations!
Directions:
Mix with tap to warm water and preferably softened water. Extremely Clean Powder can be used alone or add a booster to cut through tough grease and grime with ease. Make sure to fully flush carpet after. Use mechanical agitation in traffic lanes and high usage areas for deeper and quicker results. Can also be used as an alkaline rinse
Mixing Guide:
8-1 INLINE SPRAYER (8-160z)
4-1 INLINE SPRAYER
(4-80z)
PUMP UP SPRAYER
(1-2z) per gallon
TRUCK MOUNT USE
(80z) per 5 gallon
Hi Alk Tile & Grout Powder
(Hard Surface Powder)
Formula 1992 Hi-Alk Powdered Tile & Grout Cleaner is a high pH prespray. At the top of PH scale, its perfect for Tile, Grout, Stone, and Concrete. It's also a great booster for super soiled Commercial, Poly, and Olefin carpets. This is not safe for wool or 5tit generation nylon. Take care to wipe residue off items you might come in contact with.
BEWARE: this product can remove some wax finish off VCT surfaces.
Directions: Use only as directed. Pre-test in inconspicuous spot of surface to be cleaned to check if color will be affected. Work in a well ventilated area. Keep kids and pets out of the cleaning area. Depending on soil levels mix 2-4 (ounces) 1-2 (scoops) per gallon of warm to hot water. Best if applied pouring the solution in a puddle in the center of the area to be cleaned and move around with a mop or cat mop. Mask and protect any stainless steel. Allow 10-20 minutes of dwell time. Agitation with a CRB or grout brush can speed up your cleaning process but is powerful enough to not require agitation. Rinse solution clean using warm to hot water. For best results, use a rotary turbo tool or minimum hard surface cleaning wand. For carpet cleaning boosting add 2-8 ounces to your inline sprayer.
Mixing Instructions:
PUMP UP SPRAYER
2 to 4 oz. per gallon of warm water
For extreme grime, use 6 oz. per gallon
INLINE SPRAYER
8:1 injection sprayers, use 16 oz.
4:1 Injection sprayers, use 8 0z.
Allow to dwell on surface for 5 min. before rinsing, do not let product dry completely.
CARPET CLEANING BOOSTER
8:1 injection sprayers, use 6 to 8 oz.
4:1 injection sprayers, use 3 to 4 oz.
Formula 1992 Hi-Alk Powdered Tile & Grout Cleaner is a high pH prespray. At the top of PH scale, its perfect for Tile, Grout, Stone, and Concrete. It's also a great booster for super soiled Commercial, Poly, and Olefin carpets. This is not safe for wool or 5tit generation nylon. Take care to wipe residue off items you might come in contact with.
BEWARE: this product can remove some wax finish off VCT surfaces.
Directions: Use only as directed. Pre-test in inconspicuous spot of surface to be cleaned to check if color will be affected. Work in a well ventilated area. Keep kids and pets out of the cleaning area. Depending on soil levels mix 2-4 (ounces) 1-2 (scoops) per gallon of warm to hot water. Best if applied pouring the solution in a puddle in the center of the area to be cleaned and move around with a mop or cat mop. Mask and protect any stainless steel. Allow 10-20 minutes of dwell time. Agitation with a CRB or grout brush can speed up your cleaning process but is powerful enough to not require agitation. Rinse solution clean using warm to hot water. For best results, use a rotary turbo tool or minimum hard surface cleaning wand. For carpet cleaning boosting add 2-8 ounces to your inline sprayer.
Mixing Instructions:
PUMP UP SPRAYER
2 to 4 oz. per gallon of warm water
For extreme grime, use 6 oz. per gallon
INLINE SPRAYER
8:1 injection sprayers, use 16 oz.
4:1 Injection sprayers, use 8 0z.
Allow to dwell on surface for 5 min. before rinsing, do not let product dry completely.
CARPET CLEANING BOOSTER
8:1 injection sprayers, use 6 to 8 oz.
4:1 injection sprayers, use 3 to 4 oz.
Extreme Odor
(Odor Control Pre spray booster & Spotter)
Directions:
Locate urine with UV light, saturate stain with Extreme Odor Control a n d let dwell for 10 minutes, mechanically agitate and then flush. Ideally, use a sub- surface tool or rotary for deeper effectiveness. Any stubborn yellow stains that remain, mist Extreme Odor Control and walk away. Most disappear overnight!
Mixing Guide:
INLINE SPRAYER
Straight
Add 8 oz. to pre-spray as a booster
4-1 INLINE SPRAYER
Straight to 50/50
Add 40z to pre-spray as a booster.
PUMP UP SPRAYER
Straight to 1-2 oz. per gal
Add 1-2 oz. to pre-spray as a booster
Directions:
Locate urine with UV light, saturate stain with Extreme Odor Control a n d let dwell for 10 minutes, mechanically agitate and then flush. Ideally, use a sub- surface tool or rotary for deeper effectiveness. Any stubborn yellow stains that remain, mist Extreme Odor Control and walk away. Most disappear overnight!
Mixing Guide:
INLINE SPRAYER
Straight
Add 8 oz. to pre-spray as a booster
4-1 INLINE SPRAYER
Straight to 50/50
Add 40z to pre-spray as a booster.
PUMP UP SPRAYER
Straight to 1-2 oz. per gal
Add 1-2 oz. to pre-spray as a booster
Liquid Gold
(Easy Extract Water Soluble Traffic Booster and Solvent)
LIQUID GOLD is ideal for use on commercial carpet cleaning and rat nasty residential carpet. This concentrated and powerful Traffic Lane Cleaner removes the heavy traveled traffic soils and grease from kitchens, buffets, mechanic shops, office areas, etc. LIQUID GOLD was specially formulated to be used alone as pre-spray, spotter, and add to your pre-spray mix as a booster to help cut through the grease and grime on those rat nasty tough industrial jobs!
Directions:
Mix with tap to warm water and preferably softened water. LIQUID GOLD can be used alone or added to pre-spray as a booster to cut through tough grease and grime. Can be applied directly to tough grease and grime spots. Make sure to fully flush area after. Use mechanical agitation in traffic lanes and high usage areas for deeper and quicker results.
Mixing Guide:
8-1 INLINE SPRAYER
(8 to 16oz) pre-spray
4-1 INLINE SPRAYER
(4 to 8oz) pre-spray
PUMP-UP SPRAYER OR HAND SPRAYER
(1 to 2oz per gallon) pre-spray
LIQUID GOLD is ideal for use on commercial carpet cleaning and rat nasty residential carpet. This concentrated and powerful Traffic Lane Cleaner removes the heavy traveled traffic soils and grease from kitchens, buffets, mechanic shops, office areas, etc. LIQUID GOLD was specially formulated to be used alone as pre-spray, spotter, and add to your pre-spray mix as a booster to help cut through the grease and grime on those rat nasty tough industrial jobs!
Directions:
Mix with tap to warm water and preferably softened water. LIQUID GOLD can be used alone or added to pre-spray as a booster to cut through tough grease and grime. Can be applied directly to tough grease and grime spots. Make sure to fully flush area after. Use mechanical agitation in traffic lanes and high usage areas for deeper and quicker results.
Mixing Guide:
8-1 INLINE SPRAYER
(8 to 16oz) pre-spray
4-1 INLINE SPRAYER
(4 to 8oz) pre-spray
PUMP-UP SPRAYER OR HAND SPRAYER
(1 to 2oz per gallon) pre-spray
Supercharger
(Anti wicking organic stain removing spotter and pre spray booster)
Bio Clean Supercharger is a peroxide based pre-spray booster for all of those hard to remove everyday stains including but not limited to; Coffee, Tea, Blood, Red Wine, Pet Urine. When adding this to your pre-spray it helps lift the soil from the bottom of the carpet to the top of the carpet. You absolutely can not go wrong with this potent yet completely odorless and colorless "GREEN" product. Only to be used on synthetic fibers.
Directions:
Mix with tap to warm water and preferable softened water. Bio Clean Supercharger can be added to pre-spray as a booster to cut through the tough grime and organic stains. Can be applied directly to coffee, tea, blood, red wine, pet urine stains. Make sure to fully flush area after. Use mechanical agitation in traffic lanes and high usage areas for deeper and quicker results. Can also be used to remove tough urine stains by just spraying directly on stain and leave it and walk away.
8-1 INLINE SPRAYER
(8oz) Pre-Spray Booster
4-1 INLINE SPRAYER
(4oz) Pre-Spray Booster
PUMP-UP SPRAYER
(1-2oz per gallon) Pre-Spray Booster
Bio Clean Supercharger is a peroxide based pre-spray booster for all of those hard to remove everyday stains including but not limited to; Coffee, Tea, Blood, Red Wine, Pet Urine. When adding this to your pre-spray it helps lift the soil from the bottom of the carpet to the top of the carpet. You absolutely can not go wrong with this potent yet completely odorless and colorless "GREEN" product. Only to be used on synthetic fibers.
Directions:
Mix with tap to warm water and preferable softened water. Bio Clean Supercharger can be added to pre-spray as a booster to cut through the tough grime and organic stains. Can be applied directly to coffee, tea, blood, red wine, pet urine stains. Make sure to fully flush area after. Use mechanical agitation in traffic lanes and high usage areas for deeper and quicker results. Can also be used to remove tough urine stains by just spraying directly on stain and leave it and walk away.
8-1 INLINE SPRAYER
(8oz) Pre-Spray Booster
4-1 INLINE SPRAYER
(4oz) Pre-Spray Booster
PUMP-UP SPRAYER
(1-2oz per gallon) Pre-Spray Booster
Green Spotter Concentrate
(General Spot Remover Concentrate)
Spotter is specially formulated to be a natural but powerful spot remover. Spotter has many essential uses. Spotter comes bottled three ways for every carpet cleaners convenience! Have you ever been to a home or commercial job where the individual has high fragrance intolerance? Well, we have your solution, Spotter is completely odorless, colorless and kid and pet friendly! Spotter was carefully formulated to be environmentally friendly and still holds one of the most powerful agents to pull professional grade stains out at the same time. What more could you ask for?
Directions:
Apply ready to use Spotter directly to spot. Use white towel to blot up spot. (1 TBSP Odor Control in a quart spray bottle makes a great Spotter for home owner).
Mixing Guide:
1 gallon makes 15 gallons of ready spray
1oz in quart size spray bottle
Spotter is specially formulated to be a natural but powerful spot remover. Spotter has many essential uses. Spotter comes bottled three ways for every carpet cleaners convenience! Have you ever been to a home or commercial job where the individual has high fragrance intolerance? Well, we have your solution, Spotter is completely odorless, colorless and kid and pet friendly! Spotter was carefully formulated to be environmentally friendly and still holds one of the most powerful agents to pull professional grade stains out at the same time. What more could you ask for?
Directions:
Apply ready to use Spotter directly to spot. Use white towel to blot up spot. (1 TBSP Odor Control in a quart spray bottle makes a great Spotter for home owner).
Mixing Guide:
1 gallon makes 15 gallons of ready spray
1oz in quart size spray bottle
Pro Rinse
(Foam and chemical removal booster with anti browning & odor control properties)
PRO RINSE is a rinse that would neutralize and also provide extra cleaning power with no residues: This product should be added to the rise water to remove detergent buildup stabilizes dyes, inhibits browning and color bleeding. This product is so versatile it can be used with Wool, and other fine fabrics, or even to help remove urine salts deposits. The use of this product should be preceded with the application of a PRESPRAY detergent which has been allowed to soak and attack the soil and grease. The boosted cleaning power will speed up your cleaning times.
Directions: Use only as directed. For carpet and water cleanable upholstery. Always pre-test in an inconspicuous location. Do not mix with cleaning detergents.
Mixing Guide:
TRUCK MOUNT USE:
Mix 1 quart into 5 gallons of water to make truck mount concentrate. Set flow meter at 2 gal./hour, extract.
SPRAY RINSE:
Mix 4 to 6 oz./gal., apply 1 gallon RTU to 200 to 500 sq. ft. (Depending on pile density). Vacuum extract or rake into carpet for maximum performance.
FOR URINE TREATMENT:
Mix 6 to 8 oz. /gal. Saturate carpet at urine spots at 1 gallon RTU per 50 to 100 sq. ft. (Depending on the carpet density). Allow 15 minutes, extract. Apply Extreme Odor Control.
PORTABLE:
Mix 1 to 2 oz. per gallon of water.
PRO RINSE is a rinse that would neutralize and also provide extra cleaning power with no residues: This product should be added to the rise water to remove detergent buildup stabilizes dyes, inhibits browning and color bleeding. This product is so versatile it can be used with Wool, and other fine fabrics, or even to help remove urine salts deposits. The use of this product should be preceded with the application of a PRESPRAY detergent which has been allowed to soak and attack the soil and grease. The boosted cleaning power will speed up your cleaning times.
Directions: Use only as directed. For carpet and water cleanable upholstery. Always pre-test in an inconspicuous location. Do not mix with cleaning detergents.
Mixing Guide:
TRUCK MOUNT USE:
Mix 1 quart into 5 gallons of water to make truck mount concentrate. Set flow meter at 2 gal./hour, extract.
SPRAY RINSE:
Mix 4 to 6 oz./gal., apply 1 gallon RTU to 200 to 500 sq. ft. (Depending on pile density). Vacuum extract or rake into carpet for maximum performance.
FOR URINE TREATMENT:
Mix 6 to 8 oz. /gal. Saturate carpet at urine spots at 1 gallon RTU per 50 to 100 sq. ft. (Depending on the carpet density). Allow 15 minutes, extract. Apply Extreme Odor Control.
PORTABLE:
Mix 1 to 2 oz. per gallon of water.
SP Natty - COMING SOON
(Delicate Fabric Concentrated Pre Spray: linens, cotton, silk & animal hairs)
Details Coming Soon
Details Coming Soon
All Clean - COMING SOON
(All engineered floors, metals & general low residue surface cleaning)
Details Coming Soon
Details Coming Soon
SP Bulk Grout Sealer - COMING SOON
(Can be added to reusable aerosol cans or applied direct)
Details Coming Soon
Details Coming Soon
Out of the Park Cleaner - COMING SOON
Out of the Park All Surface Cleaner is a multi-purpose cleaner. Ranging from counter tops to hard wood floors all the way to bathrooms, cleaning stainless steel, LVP flooring and many surfaces in-between. Out of the Park is a environmentally friendly product with concentrated cleaning powers.
Directions:
For countertops: Spray product onto surface and lightly agitate.
Hard flooring or LVP: Lightly mist product onto the surface and agitate.
Carpet: Use sprayer to lightly mist product in desired area and extract with Truckmount or portable.
Kitchen: Spray on Floors, cabinets, refrigerator, range and garbage cans agitating with a cleaning cloth or microfiber mop.
Rest rooms: Spray on toilet bowl and seat, floor near toilet, lavatory, and tub or shower stall agitating with cleaning cloth or microfiber mop.
Mixing Guide:
8-1 INLINE SPRAYER
(8oz) pre-spray
4-1 INLINE SPRAYER
(4oz) per-spray
PUMP UP SPRAYER, HAND SPRAYER OR MOP BUCKET
(1-2oz) pre-spray
(2-4 oz) per gallon. For cleaning hard surfaces, restrooms, kitchens, LVP, Counter tops and most other hard surfaces.
Directions:
For countertops: Spray product onto surface and lightly agitate.
Hard flooring or LVP: Lightly mist product onto the surface and agitate.
Carpet: Use sprayer to lightly mist product in desired area and extract with Truckmount or portable.
Kitchen: Spray on Floors, cabinets, refrigerator, range and garbage cans agitating with a cleaning cloth or microfiber mop.
Rest rooms: Spray on toilet bowl and seat, floor near toilet, lavatory, and tub or shower stall agitating with cleaning cloth or microfiber mop.
Mixing Guide:
8-1 INLINE SPRAYER
(8oz) pre-spray
4-1 INLINE SPRAYER
(4oz) per-spray
PUMP UP SPRAYER, HAND SPRAYER OR MOP BUCKET
(1-2oz) pre-spray
(2-4 oz) per gallon. For cleaning hard surfaces, restrooms, kitchens, LVP, Counter tops and most other hard surfaces.
Extremely Clean Delicate Fabric Care - COMING SOON
Extremely Clean Delicate Fabric Care is a specially formulated to be a natural but powerful cleaner for fine fabrics. This product is safe for all fabrics, fine linens, lace, silk, wool, cotton, nylon, polyester, fleece, and delicate fabric. Extremely Clean Delicate Fabric Care is the product to use on unidentifiable fibers in all forms, upholstery, animal hair rugs, carpet, etc.
Mixing Guide:
Mix 4-8 oz per gallon
Mixing Guide:
Mix 4-8 oz per gallon
Fluoro Guard Protector - COMING SOON
Fluoro Guard Protector is a solvent based ready to use Fluorochemical Soil repellant and protectant used on upholstery, carpet, rug, grout, and stone. Fluoro Guard will not change the appearance of surface after application.
Directions:
Apply in a very well ventilated area. Do Not Dilute!
For carpets and fabrics: Use this product as is, and spray a light mist over entire area, hold 6-12 inches from fabric and spray as a fine mist, wetting the surface evenly. Fabric dries in 30min. to 2hrs. and reaches full repellency in 24hrs. For Application to Tile and Grout & Stone surfaces: Apply Extremely Clean Fluoro-Guard with a pump-up applicator to the tile and grout surface. Using a Flat (Microfiber) mop, spread evenly on the entire surface making sure to fill in the grout well while applying and moving around the sealer. Apply in a far corner and work your way out.
We recommend Speed drying with air movers to make the surface available for quicker use. No need to worry about having to buff off the produce… it will dry and flash off the tile surface with no haze or residue. If for some reason there were a haze or residue, reactivate that area with the Fluoro-Guard and wipe the area allowing to dry again. This can happen if a person walks on an area before completely dry. Allow the product to dry with no foot traffic for a couple hours. Coverage on Carpets and Fabrics 800–1100 Sq. Ft. per Gal. Even Better Coverage on Tile and Grout surfaces. Will not affect the appearance, feel or color of tile or fabric.
Directions:
Apply in a very well ventilated area. Do Not Dilute!
For carpets and fabrics: Use this product as is, and spray a light mist over entire area, hold 6-12 inches from fabric and spray as a fine mist, wetting the surface evenly. Fabric dries in 30min. to 2hrs. and reaches full repellency in 24hrs. For Application to Tile and Grout & Stone surfaces: Apply Extremely Clean Fluoro-Guard with a pump-up applicator to the tile and grout surface. Using a Flat (Microfiber) mop, spread evenly on the entire surface making sure to fill in the grout well while applying and moving around the sealer. Apply in a far corner and work your way out.
We recommend Speed drying with air movers to make the surface available for quicker use. No need to worry about having to buff off the produce… it will dry and flash off the tile surface with no haze or residue. If for some reason there were a haze or residue, reactivate that area with the Fluoro-Guard and wipe the area allowing to dry again. This can happen if a person walks on an area before completely dry. Allow the product to dry with no foot traffic for a couple hours. Coverage on Carpets and Fabrics 800–1100 Sq. Ft. per Gal. Even Better Coverage on Tile and Grout surfaces. Will not affect the appearance, feel or color of tile or fabric.
From A Professional Like You
CONTACT US TO PLACE AN ORDER!
Order Chemicals
